Mechanical APDL · 2024 R1
PRNEAR
Signature
PRNEAR, Lab, Opt, KCN, VAL1, VAL2, VAL3, VAL4, VAL5, VAL6, VAL7, VAL8,VAL9Summary
APDL POST1 postprocessor command (PRNEAR) used in modeling or analysis workflows (Lab, POINT, SPHERE, on the spherical structure).
Arguments
| Name | Description |
|---|---|
| Lab | Alphanumeric label or identifier. |
| POINT | POINT parameter for the POST1 command. |
| SPHERE | SPHERE parameter for the POST1 command. |
| on the spherical structure | on the spherical structure parameter for the POST1 command. |
| PATH | PATH parameter for the POST1 command. |
| along the path | along the path parameter for the POST1 command. |
| Opt | Opt parameter for the POST1 command. |
| PSUM | PSUM parameter for the POST1 command. |
| PHAS | PHAS parameter for the POST1 command. |
| SPL | SPL parameter for the POST1 command. |
| SPLA | SPLA parameter for the POST1 command. |
| KCN | KCN parameter for the POST1 command. |
| VAL1 | VAL1 parameter for the POST1 command. |
| VAL2 | VAL2 parameter for the POST1 command. |
| y coordinate value | y coordinate value parameter for the POST1 command. |
| VAL3 | VAL3 parameter for the POST1 command. |
| z coordinate value | z coordinate value parameter for the POST1 command. |
| VAL4 - VAL8 | VAL4 - VAL8 parameter for the POST1 command. |
| not used | not used parameter for the POST1 command. |
| VAL9 | VAL9 parameter for the POST1 command. |
| VAL1 | VAL1 parameter for the POST1 command. |
| VAL2 | VAL2 parameter for the POST1 command. |
| VAL3 | VAL3 parameter for the POST1 command. |
| VAL4 | VAL4 parameter for the POST1 command. |
| VAL5 | VAL5 parameter for the POST1 command. |
| VAL6 | VAL6 parameter for the POST1 command. |
| VAL7 | VAL7 parameter for the POST1 command. |
| VAL8 | VAL8 parameter for the POST1 command. |
| VAL9 | VAL9 parameter for the POST1 command. |
Manual grouping
- POST1 : Special Purpose
This page summarizes syntax and usage in plain language. It does not replace official Ansys documentation. See the full command entry in Ansys Help (Ansys license required).