Mechanical APDL · 2024 R1
PLVECT
Signature
PLVECT, Item, Lab2, Lab3, LabP, Mode, Loc, Edge, KUNDSummary
POST1 command that operates on data tables or vectors (Item, Lab2, Lab3, LabP).
Arguments
| Name | Description |
|---|---|
| Item | Item parameter for the POST1 command. |
| Lab2 | Lab2 parameter for the POST1 command. |
| Lab3 | Lab3 parameter for the POST1 command. |
| LabP | LabP parameter for the POST1 command. |
| Mode | Mode parameter for the POST1 command. |
| RAST | RAST parameter for the POST1 command. |
| VECT | VECT parameter for the POST1 command. |
| Loc | Loc parameter for the POST1 command. |
| ELEM | Element label. |
| NODE | Node label. |
| Edge | Edge parameter for the POST1 command. |
| OFF | OFF parameter for the POST1 command. |
| ON | ON parameter for the POST1 command. |
| KUND | KUND parameter for the POST1 command. |
Manual grouping
- POST1 : Results
- POST1 : Element Table
This page summarizes syntax and usage in plain language. It does not replace official Ansys documentation. See the full command entry in Ansys Help (Ansys license required).