Mechanical APDL · 2024 R1
LCOPER
Signature
LCOPER, Oper, LCASE1, Oper2, LCASE2,SweepANGSummary
POST1 command that applies or manages boundary conditions and loads (Oper, ZERO, SQUA, SQRT).
Arguments
| Name | Description |
|---|---|
| Oper | Oper parameter for the POST1 command. |
| ZERO | ZERO parameter for the POST1 command. |
| SQUA | SQUA parameter for the POST1 command. |
| SQRT | SQRT parameter for the POST1 command. |
| LPRIN | LPRIN parameter for the POST1 command. |
| ADD | ADD parameter for the POST1 command. |
| SUB | SUB parameter for the POST1 command. |
| SRSS | SRSS parameter for the POST1 command. |
| MIN | MIN parameter for the POST1 command. |
| MAX | MAX parameter for the POST1 command. |
| ABMN | ABMN parameter for the POST1 command. |
| ABMX | ABMX parameter for the POST1 command. |
| LCASE1 | LCASE1 parameter for the POST1 command. |
| Oper2 | Oper2 parameter for the POST1 command. |
| MULT | MULT parameter for the POST1 command. |
| CPXMAX | CPXMAX parameter for the POST1 command. |
| LCASE2 | LCASE2 parameter for the POST1 command. |
| SweepANG | SweepANG parameter for the POST1 command. |
Manual grouping
- POST1 : Load Case Calculations
This page summarizes syntax and usage in plain language. It does not replace official Ansys documentation. See the full command entry in Ansys Help (Ansys license required).