Mechanical APDL · 2024 R1
FCTYP
Signature
FCTYP, Oper, LabSummary
APDL POST1 postprocessor command (FCTYP) used in modeling or analysis workflows (Oper, ADD, DELE, Lab).
Arguments
| Name | Description |
|---|---|
| Oper | Oper parameter for the POST1 command. |
| ADD | ADD parameter for the POST1 command. |
| DELE | DELE parameter for the POST1 command. |
| Lab | Alphanumeric label or identifier. |
| EMAX | EMAX parameter for the POST1 command. |
| SMAX | SMAX parameter for the POST1 command. |
| TWSI | TWSI parameter for the POST1 command. |
| TWSR | TWSR parameter for the POST1 command. |
| HFIB | HFIB parameter for the POST1 command. |
| Hashin fiber failure criterion | Hashin fiber failure criterion parameter for the POST1 command. |
| HMAT | HMAT parameter for the POST1 command. |
| Hashin matrix failure criterion | Hashin matrix failure criterion parameter for the POST1 command. |
| PFIB | PFIB parameter for the POST1 command. |
| Puck fiber failure criterion | Puck fiber failure criterion parameter for the POST1 command. |
| PMAT | PMAT parameter for the POST1 command. |
| L3FB | L3FB parameter for the POST1 command. |
| LaRc03 fiber failure criterion | LaRc03 fiber failure criterion parameter for the POST1 command. |
| L3MT | L3MT parameter for the POST1 command. |
| LaRc03 matrix failure criterion | LaRc03 matrix failure criterion parameter for the POST1 command. |
| L4FB | L4FB parameter for the POST1 command. |
| LaRc04 fiber failure criterion | LaRc04 fiber failure criterion parameter for the POST1 command. |
| L4MT | L4MT parameter for the POST1 command. |
| LaRc04 matrix failure criterion | LaRc04 matrix failure criterion parameter for the POST1 command. |
| USR1 through USR9 | USR1 through USR9 parameter for the POST1 command. |
| User-defined failure criteria | User-defined failure criteria parameter for the POST1 command. |
Manual grouping
- POST1 : Failure Criteria
This page summarizes syntax and usage in plain language. It does not replace official Ansys documentation. See the full command entry in Ansys Help (Ansys license required).