Mechanical APDL · 2024 R1
CISOL
Signature
CISOL, n, ID, node, Cont, DtypeSummary
APDL POST26 postprocessor command (CISOL) used in modeling or analysis workflows (n, ID, node, Cont).
Arguments
| Name | Description |
|---|---|
| n | n parameter for the POST26 command. |
| ID | ID parameter for the POST26 command. |
| node | Node label. |
| Cont | Cont parameter for the POST26 command. |
| Dtype | Dtype parameter for the POST26 command. |
| JINT | JINT parameter for the POST26 command. |
| J-integral | J-integral parameter for the POST26 command. |
| IIN1 | IIN1 parameter for the POST26 command. |
| Interaction integral 1 | Interaction integral 1 parameter for the POST26 command. |
| IIN2 | IIN2 parameter for the POST26 command. |
| Interaction integral 2 | Interaction integral 2 parameter for the POST26 command. |
| IIN3 | IIN3 parameter for the POST26 command. |
| K1 | K1 parameter for the POST26 command. |
| Mode 1 stress-intensity factor | Mode 1 stress-intensity factor parameter for the POST26 command. |
| K2 | K2 parameter for the POST26 command. |
| Mode 2 stress-intensity factor | Mode 2 stress-intensity factor parameter for the POST26 command. |
| K3 | K3 parameter for the POST26 command. |
| Mode 3 stress-intensity factor | Mode 3 stress-intensity factor parameter for the POST26 command. |
| G1 | G1 parameter for the POST26 command. |
| Mode 1 energy release rate | Mode 1 energy release rate parameter for the POST26 command. |
| G2 | G2 parameter for the POST26 command. |
| Mode 2 energy release rate | Mode 2 energy release rate parameter for the POST26 command. |
| G3 | G3 parameter for the POST26 command. |
| Mode 3 energy release rate | Mode 3 energy release rate parameter for the POST26 command. |
| GT | GT parameter for the POST26 command. |
| Total energy release rate | Total energy release rate parameter for the POST26 command. |
| MFTX | MFTX parameter for the POST26 command. |
| Total material force X | Total material force X parameter for the POST26 command. |
| MFTY | MFTY parameter for the POST26 command. |
| Total material force Y | Total material force Y parameter for the POST26 command. |
| MFTZ | MFTZ parameter for the POST26 command. |
| Total material force Z | Total material force Z parameter for the POST26 command. |
| CEXT | CEXT parameter for the POST26 command. |
Manual grouping
- POST26 : Set Up
This page summarizes syntax and usage in plain language. It does not replace official Ansys documentation. See the full command entry in Ansys Help (Ansys license required).